DVA 5 litre Manual Regeneration Water softener 3/8 Thread - LT5

DVA LT5, 5  litre manual water softener used in coffee machines, glass washers, steam cooking ovens, vending machines and dishwashers.

Safety, reliability and quality are the three major features of DVA manual regeneration water softeners. 

The purpose of water softeners is to prevent the formation of limescale deposits caused by water hardness, which results in reduced maintenance costs.

Resin regeneration must be performed periodically in order to guarantee full efficiency; this simple and safe procedure must be performed by an operator and takes on average from 20 to 40 minutes.  

The LT models have  with two ball-type valves in brass for water inlet and outlet pipes, with 3/8 push on fittings.   

DVA water softeners have been manufactured in Italy since 1974, and are still manufactured in Italy today.

See below for regeneration tube and Supply hoses if required.

TECHNICAL FEATURES DVA LT5
Height -300 mm - Diameter 190mm
Weight - 5 kg
Water Supply pressure -  min 1 bar- max 8 bar
Max flow rate suggested - 1000 l/h
Room temperature - min 4°C – max 35°C
Salt quantity for regeneration cycle 0.5 kg

Salt Capacity - 1 KG

Resin capacity - 3.5 Litres

Softener comes with salt and resin installed.

We  also offer DVA spares and replacement resin and salt.

If you require assistance selecting your water softener / filter please do not hesitate to contact us.

If you are unsure of the water filter you require please contact us. We will happily assist you in selecting the correct filter for your application.

We offer a large range of espresso machine spares and accessories to include water filters, Barista supplies, tools and cleaning products.

Our online ordering system is Secure and easy and of course you can order over the phone if you prefer.
Cost effective delivery to UK and Ireland